SPECIAL OCTOPUS GRIPPING HANDS FOR SMALL FLOWPACKS

In this video you can see the test of a special Octopus gripper hand that Vuototecnica’s technical department recently designed for a customer.
The end user needed to pick up and box small flowpacks of rusks like the ones you see in the pictures.
Thanks to this customized Octopus solution, the picking can finally be done smoothly. The flexible film of the rusks pack is no longer a problem. More...

In the printing industry, vacuum is used for sheet feeding to offset presses, from inlet to outlet, after printing, while air at low feed pressure is often used to separate the sheets.
This is a balanced dance between vacuum and blown air that needs to be designed and managed efficiently.
In most cases, however, despite the fact that the feeder has only 6-8 small diameter suction cups, air and vacuum are generated and excluded by a very large pump, almost always placed far from the machine, with a series of bulky pipes. More...

Having to deal with windows and windshields is not a simple thing because it is likely to ruin the parts and because often the handling of the load proceeds from different phases, from the line to the vehicle on which it is to be mounted.
In the video you can notice that the robot grips the windshield in a firm way, and moves it horizontally, vertically and upside down without any difficulty, then resting it on the truck, safely.
This is thanks to Maxigrip suction cups, combined wiht Vuototecnica MVG multifunctional ejector, for the vacuum generation. More...

THE STRENGTHS OF VUOTOTECNICA RVP PUMPS

The new RVP single-stage rotary vane pumps by Vuototecnica are already having a great success in terms of performance.
On the intake, the check valve is integrated into the pumps as standard.
On request, a suitable filter to stop possible sucked impurities can be provided. More...

You are receiving this newsletter because you are registered in our database.
To cancel your subscription, select the "Unsubscribe" link below.